CNC Machining Oneshop Redding error33

Alright, back at it again. So after running through a simple path to see if it would stop before completion I found that it still does, what would happen is it would go through about 40% of its path, then give the carbide an error code (error33) and stop the toolpath, I've gone through a bunch of different cuts, sometimes trying them several times and nothing worked. I've tried different outlets, different power banks entirely for the router but always had the same result. I asked my brother as he mentioned having some similar issues and tried his solutions but didn't work. What he had done was to lower the fine tolerance of the passes to have a rougher cut out, then come by later with another tool to clean it up.

After looking a bit online forums I found a few possible solutions. 

Carbide 3D's Shapeoko cnc machine was originally designed in metric VS imperial. It supports imperial, however it wasn't designed specifically for this and so has to do calculations to convert it to that and so has a lot more of a load than if you where working with metric. If this is the issue then simply designing everything in imperial then just switch the units it measures to metric when setting the tool paths.

This would also explain why not so many people are having this issue as most people use metric for designing and creating toolpath's. Which I primarily use as well but didn't have any metric measuring tapes when setting the stock and so set the unit of measurement to imperial.
Another possible reason for the issue is the sheer amount of digits it has to calculate and one guy said he solved the issue by rounding everything to only have at most 3 decimal spots. For instance, if the side load cutting rate is at 0.04195 you would simply round that to 0.042 and etc with all the settings. Apparently this reduces the overall load the machine has to take.

Here is a link to the forum that I got this information on:

So after making a few modifications to the tool path settings, I set it running again and await the results.